How to paste your vinyl decal stickers?

At Vinyl Haus, we produce 2 main types of vinyl stickers,
1) Full Color Printed Stickers,
2) Cut-Out Stickers.

1) Instructions for Full Color Printed Stickers
For full color printed stickers, to paste them, just "peel and stick" as what you would do with any normal stickers. To ensure proper adhesion, clean the surface thoroughly before pasting the stickers. When pasting the sticker, you can also follow either the "WET" and "DRY" method illustrated below in the instructions for the cut-out stickers, just that printed stickers usually do not come with application tape. Printed stickers usually come with a layer of gloss laminate on top of the stickers to protect the print from physical abrasion.
NOTE: Do NOT Peel off the Gloss laminate, it will damage the stickers!

2) Instructions for Cut-Out vinyl stickers
Below is a set of simple instructions to help you apply your vinyl cut-out decal stickers using the "dry" method. For larger stickers, use the "WET" method for easier installation. For "WET" method, simply mix a few drops of hand soap with tap water and spray onto the surface you want to paste on after STEP 3.

Step 1:
Clean the area that you want to paste the sticker on and ensure that there are no wax, grease and dirt present on the surface.

Step 2:
Place the sticker on the location that you want to paste on and tape one side with masking tape.

Step 3:
Detach the Clear application tape from the backing sheet, ensuring the sticker is picked up by the application tape.

Step 4:
Use a squeegee or an old credit card and slowly push on the application tape at 45 degree strokes to minimize the possibilities of air bubbles trapping under the sticker.

Step 5:
Slowly peel off the clear application tape and your sticker is nicely pasted on to your target surface.

It is that simple. :)
For a PDF copy of the instructions, just drop us an email at VinylHaus@gmail.com.
Below is the screenshot of the PDF instuctions.

Thank you.